| SHOCK RACK SERIES |  |
||||||||||||||||||||||||||||||||||||||||
 |
Roto
Shock Racks (20" Deep) SKB’s new Roto Shock Racks feature a 20" deep rack frame installed in a roto molded tough shell with an integrally molded valance that eliminates the metal valance on the outside of the case, coupled with a rubber gasket on both the front and rear doors for water resistant protection. The integrated molded valance, ergonomic handles, and recessed, heavy-duty twist latches allow these cases to meet most ATA and military specifications. As well as roto molded toughness and ATA ratings, new elastomeric shock technology has replaced the metal coil system to provide an increased level of protection to valuable equipment. Field-replacing our standard shocks with other available elastomeric shocks can easily accommodate multiple weight bearing requirements. This new Shock series has the recognizable Roto X pattern and they are stackable within the series.
|
||||||||||||||||||||||||||||||||||||||||
 |
Roto
Shock Rack Cases (24" Deep) The new Industrial Roto Shock Rack cases from SKB have a completely redesigned frame with threaded steel rails and aluminum cross components forming an "H" shaped rigid configuration. Featuring a Patent Pending Compound hinge system and field replaceable latches that allows the lid to swing out and completely around to lie flat against the main body of the case, or you can go lid-less with an effortless lift motion and reinstalled with the same ease in seconds. The front and rear lids are designed to protrude into the base of the case approximately 1" and their unique double wall structure makes them incredibly stiff where this intersection occurs. Making this new generation of shock racks mil-spec sealing characteristics with significantly fewer latches than most competition. This allows for rapid deployment in an up-right configuration -- even when stacked. The standard depth front to rear rail is 24" and each lid is 4" deep. The new SKB shock-rack system stacks securely with the wheels on or off and this revolutionary design is also the only shock rack that will open front and back while stacked.
|
||||||||||||||||||||||||||||||||||||||||
 |
New Roto
Shock Racks (30" Deep) SKB’s new design is an eight
unit 30" deep roto-molded shock rack which should be an instant success with all
companies utilizing the deeper servers such as the new Dell and Compaq. Nobody else
manufactures a rotationally molded shock rack that is 30" deep and that fits inside
the center portion of the case.
|
||||||||||||||||||||||||||||||||||||||||